Icom IC-91A Instruction Manual page 63

D D Low-speed data communication application
setting
Configure the low-speed data communication application as
follows.
• Port : The same COM port number as IC-
91A/91AD's
• Baud rate : 38.4 kbps
(fixed value)
• Data : 8 bit
• Parity : None
• Stop : 1 bit
• Flow control : Xon/Xoff
D D Low-speed data communication operation
NOTE: Confirm that in AUTO, the computer controls when
[PTT] is activated to send data and the user doesn't have
to operate the radio.
qSet your own, station call signs, etc. as described in
"I Digital voice mode operation"
peater operation" .
(p. 41)
wRefer to the instructions of the low-speed data communi-
cation application.
e To transmit data
• With your voice audio, push and hold [PTT] to transmit while
sending data from the PC. Release [PTT] to receive.
• Under computer control, see Transmission condition setting at
right.
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
and "I Digital re-
(p. 38)
D D Transmission condition setting
q Enter "DV DATA TX" in DV set mode.
➪
MENU screen DV SET MODE
(Push [MENU/LOCK]) (Rotate [DIAL]
w Rotate [DIAL] †
to select "PTT" or "AUTO."
ePush [ï](5)
to return to DV set mode, and push
(or [Ω Ω ](4))
[MENU/LOCK] to return to frequency indication.
[DIAL] ↔ [∫ ∫ ](2)/[√ √ ](8)
†
7
(p. 92)
➪
DV DATA TX
† †
, then push [ï](5) .)
[ï](5) ↔ [≈ ≈ ](6)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
57