Icom IC-91A Instruction Manual page 41

y Push [≈ ≈ ](6) to select 2nd digit, then rotate [DIAL]
lect the desired character or code.
• Push [≈ ≈ ](6) to move the cursor right; push [Ω Ω ](4) to move the
cursor left.
• 2nd digit blinks (1st digit stops blinking).
r
u Repeat the steps t and y to enter your own call sign.
• Up to a 8-digit of call sign can be set.
• If an un-necessary character is entered, push [≈ ≈ ](6) or [Ω Ω ](4) to
select the character, then push [CLR](1) to erase the selected
character, or push and hold [CLR](1) for 1 sec. to erase all char-
acters following the cursor.
• When programming a note (Up to a 4-digit for operating radio
type or area, etc.), go to step i, otherwise go to step !0 .
i Push [≈ ≈ ](6) several times to set the cursor beside "/" indi-
cation.
o Repeat steps t to y to program the desired 4-character
note.
r
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
!0 Push [ï](5) to store the programmed call sign with note
†
to se-
!1 Push [MENU/LOCK] to return to frequency indication.
[DIAL] ↔ [∫ ∫ ](2)/[√ √ ](8)
†
and returns to MY CALL SIGN screen.
7
[ï](5) ↔ [≈ ≈ ](6)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
35