Icom IC-91A Instruction Manual page 56

7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
D D Copying the call record contents into call sign memory
This is a way to copying the call record contents
"RXRPT1" and "RXRPT2")
at the same time or individually.
"R2")
qPerform the steps q to e of "D Desired call record indica-
tion" to select the desired call record or call sign.
(p. 46)
w Push [≈ ≈ ](6) to select copy select mode.
• COPY SELECT screen is displayed.
r
eRotate [DIAL]
†
to select the desired call sign to be copied
from "ALL," "RXRPT1" and "RXRPT2."
• "ALL" selection won't appear when either station or repeater call
sign memory has no blank channel.
• When "ALL" is selected
➥ Push [≈ ≈ ](6) to copy the selected record's contents into
the appropriate call sign memory.
• Returns to RX CALL SIGN screen automatically.
50
("CALLER,"
into call sign memory
("UR," "R1" and
• When "CALLER," "RXRPT1" or "RXRPT2" is
selected
zPush [≈ ≈ ](6) then rotate [DIAL]
dition of call sign memory channel selection to be copied to
from "AUTO" and "LIST SEL."
• "AUTO" selection won't appear when the appropriate call sign
memory has no blank channel.
• Go to step r when "AUTO" is selected.
r
xPush [≈ ≈ ](6), then select the desired call sign memory
channel to copy to with [DIAL].
cPush [≈ ≈ ](6) to copy the call sign into the selected call
sign memory.
• Returns to RX CALL SIGN screen automatically.
r Push [MENU/LOCK] to return to frequency indication.
[DIAL] ↔ [∫ ∫ ](2)/[√ √ ](8)
†
†
to select the desired con-
[ï](5) ↔ [≈ ≈ ](6)