Icom IC-91A Instruction Manual page 50

7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
D D Repeater operation into another zone
qSet the desired repeater's frequency, offset and shift direc-
tion in B band.
(pgs. 18, 31)
• Select DV mode in advance.
w Set your own call sign.
• See p. 34 for your own call sign programming.
e Set the desired station call sign.
• When making a CQ call
Set the desired repeater's
a "/" symbol at the 1st digit, for the area in which you
want to make a CQ call, into "UR."
• See p. 36 for station call sign programming.
r Set the repeater's call sign as follows;
z Enter "R1" in call sign set mode.
➪
MENU screen
(Push [MENU/LOCK]) (Rotate [DIAL]
xRotate [DIAL]
†
• If the nearest repeater is gateway repeater, select the re-
peater's call sign with "G" setting at the 8th digit.
cPush [ï](5) to set the call sign for "R1."
• Return to CALL SIGN screen.
vRotate [DIAL]
†
bRotate [DIAL] †
call sign.
same zone)
• The call sign should have "G" setting at the 8th digit.
• When gateway repeater call sign is set in "R1," select "NOT
USE✱" for "R2" setting.
44
(p. 38)
(p. 39)
call sign with
(in a different zone)
➪
CALL SIGN R1
†
, then push [ï](5)
to select the nearest repeater's call sign.
to select "R2" then push [ï](5)
to select the gateway repeater's
nPush [ï](5) to set the call sign for "R2."
• Return to CALL SIGN screen.
mPush [MENU/LOCK] to return to frequency indication.
t Push [PTT] to transmit; release to receive.
†
.)
†
.
(in the
[DIAL] ↔ [∫ ∫ ](2)/[√ √ ](8)
†
r
[ï](5) ↔ [≈ ≈ ](6)