Icom IC-91A Instruction Manual page 48

7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
D D Repeater operation in the same zone
qSet the desired repeater's frequency, offset and shift direc-
tion in B band.
(pgs. 18, 31)
• Select DV mode in advance. (p. 21)
w Set your own call sign.
• See p. 34 for your own call sign programming.
e Set the desired station call sign.
• See p. 36 for station call sign programming.
r Set the repeater's call sign as follows;
z Enter "R1" in call sign set mode.
➪
MENU screen
(Push [MENU/LOCK]) (Rotate [DIAL]
xRotate [DIAL] †
cPush [ï](5) to set the call sign for "R1."
• Return to CALL SIGN screen.
vRotate [DIAL] †
• RPT2 CALL SIGN screen is displayed.
bRotate [DIAL] †
call sign.
same zone)
• Select "NOT USE✱" when not operating RPT2.
nPush [ï](5) to set the call sign for "R2."
• Return to CALL SIGN screen.
r
mPush [MENU/LOCK] to return to frequency indication.
42
(p. 38)
(p. 39)
➪
CALL SIGN R1
†
, then push [ï](5)
to select the nearest repeater's call sign.
to select "R2" then push [ï](5)
to select the desired repeater's
t Push [PTT] to transmit; release to receive.
†
.)
†
.
(in the
[DIAL] ↔ [∫ ∫ ](2)/[√ √ ](8)
†
[ï](5) ↔ [≈ ≈ ](6)