I Memory Clearing - Icom IC-91A Instruction Manual

8
MEMORY/CALL CHANNELS

I Memory clearing

Contents of programmed memories can be cleared (blanked),
if desired.
qPush and hold [S.MW](MR) for 1 sec. to enter select mem-
ory write mode.
• 1 short and 1 long beeps sound.
• "µ µ
" indicator blinks.
• Do not hold [S.MW](MR) for more than 2 sec. otherwise the
memory contents will be copied to VFO.
wRotate [DIAL] to select the desired memory channel to be
cleared.
ePush [∫ ∫ ](2) or [√ √ ](8) to select "CLEAR."
r Push and hold [S.MW](MR) for 1 sec. to clear the contents.
• 3 beeps sound.
• The cleared channel changes to blank channel
• Return to select memory write mode.— "µ µ " indicator blinks.
Push [VFO] to exit select memory write mode.
NOTE: Be careful!— the contents of cleared memories
CANNOT be recalled.
72
VFO mode
145 870
Push
for 1 sec.
Enter select memory
write mode.
146 010
r
µ 000
Rotate [DIAL] to select
the desired channel.
145 000
r µ 005
Push or
to select CLEAR .
145 000
µ 005
r
Push
for 1 sec. to clear.
r
µ 005
Push .
145 870
Return to the VFO mode.