I Gps Operation - Icom IC-91A Instruction Manual

7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)

I GPS operation

During GPS mode operation, a GPS receiver
can be connected to the [DATA] socket of
put/NMEA format)
the IC-91A/91AD to indicate the current position
. The position data is transmitted with your voice sig-
Longitude)
nals at the same time.
In addition, the GPS message transmission is also available
for the GPS mode operation.
to [DATA]
58
(RS-232C out-
(Latitude and
GPS
to RS-232C port
receiver
(null modem
adapter is required)
OPC-1529R
(optional)
D D Sentence formatter setting
q Enter "GPS MODE" in DV set mode.
➪
MENU screen DV SET MODE
(Push [MENU/LOCK]) (Rotate [DIAL]
• GPS MODE screen is displayed.
r
w Rotate [DIAL]
†
to select "ON."
e Push [ï](5) †
to select GPS SENTENCE screen.
rRotate [DIAL]
†
to select the desired GPS sentence, then
push [ï](5).
• A total 5 sentences, RMC, GGA, GLL, GSA and VTG are avail-
able.
t Rotate [DIAL]
†
to turn the sentence usage ON and OFF.
yPush [ï](5)
to return to GPS SENTENCE
(or [Ω Ω ](4))
screen.
uRepeat the steps r to y to set another GPS sentence
usage.
• Up to 3 GPS sentences are usable at the same time.
i Push [MENU/LOCK] to return to frequency indication.
(p. 94)
➪
GPS MODE
† †
, then push [ï](5) .)