D Storing A Non Standard Repeater - Icom IC-7000 Instruction Manual

D Storing a non standard repeater

[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
q Turn the auto repeater function OFF in the miscel-
laneous (others) set mode. (p. 130)
w Push [MODE] to select FM mode.
e Select M M - - 2 2 .
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M M .
• Push [MENU/GRP] momentarily one or more times to
select the menu M M - - 2 2 .
r Push [F-4 V V / / M M ] to select VFO mode.
t Select M M - - 1 1 , then push [F-2 A A / / B B ] to select VFO A.
y Rotate [DIAL] to set the receive frequency (re-
peater output frequency).
u Push [F-2 A A / / B B ] to select VFO B.
i Rotate [DIAL] to set the transmit frequency (re-
peater input frequency).
o Push [F-2 A A / / B B ] to select VFO A.
!0 Push [F-1 S S P P L L ] to turn the split function ON.
• " " appears.
!1 Select M M - - 3 3 , then push [F-3 T T O O N N ] to turn on the
previously set tone encoder ON. (p. 64)
!2 Rotate [M-ch] to select the desired memory chan-
nel.
• " " appears when the blank channel is selected.
!3 Select M M - - 2 2 , then push and hold [F-2 M M W W ] for 1 sec.
to store the contents in the selected memory chan-
nel.
[DIAL]
RECEIVE AND TRANSMIT
Set the frequency.
Select
Set the frequency.
Select
Appears
SPL
Push
Appears
Selected M3, then
TON
push
Rotate
Select
Selected M2, then
MW
push
4
4
66