Operating Mode Selection; Voice Synthesizer Function - Icom IC-7000 Instruction Manual

■ Operating mode selection

The following modes are available in the IC-7000:
SSB (LSB/USB), CW, CW-R (CW reverse), RTTY,
RTTY-R (RTTY reverse), AM, FM and WFM (receive
only).
To select the desired mode of operation, push
[MODE] one or more times, then push [MODE] for
1 sec., if necessary. See the diagram at right for the
order of selection.
• The selected mode is indicated in the function display.
[MODE]
NOTE: If a desired mode cannot be selected, it
may be hidden because of a setting in the miscel-
laneous (others) set mode (pgs. 134, 135).

■ Voice synthesizer function

The IC-7000 has a voice synthesizer function. This
function announces the S-meter level, operating fre-
quency and mode (S-meter level's announcement
can be deactivated—p. 132) in a clear, electronically
generated voice, in English (or Japanese).
q Select the desired parameters to be announced,
such as Audio level, speed, language, contents, in
the miscellaneous (others) set mode. (p. 131)
w Push [SPCH/LOCK] momentarily to announce the
selected contents.
• Push [SPCH/LOCK] momentarily to stop the an-
nouncement.
BASIC OPERATION
OPERATING MODE SELECTION
USB LSB
CW CW-R
RTTY RTTY-R
AM FM WFM
SPCH TUNER
/LOCK /CALL
V/M
F-1
1.8 3.5 7
1 2
10 14 18
4 5
21 24 28
7 8
50 144 430
.
0
3
Push
momentarily
Push and hold
for 1 sec.
XFC
MW
F-2
MODE
MODE
3
FIL
6
GENE
9
F-INP
CE ENT
HM-151
[SPCH/LOCK]
3
34