Functions For Transmit; Vox Function; D Adjusting The Vox Function - Icom IC-7000 Instruction Manual

6

FUNCTIONS FOR TRANSMIT

■ VOX function

The VOX (Voice-Operated Transmission) function
switches between transmit and receive with your
voice. This function provides an opportunity for
hands-free operation or to input log entries into your
computer, etc., while operating.
q Select a phone mode (SSB, AM, FM) with [MODE].
w Select M M - - 3 3 .
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M M .
• Push [MENU/GRP] momentarily one or more times to
select the menu M M - - 3 3 .
e Push [F-1 V V O O X X ] to toggle the VOX function ON
and OFF.
• " " appears while the VOX is in use.

D Adjusting the VOX function

[MENU/GRP]
83
[F-1] [F-2] [DIAL]
[MENU/GRP] [F-1]
The VOX gain, ANTI-VOX and VOX delay can be set in
VOX set mode.
q Select a phone mode (SSB, AM, FM).
w Select M M - - 3 3 .
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M M .
• Push [MENU/GRP] momentarily one or more times to
select the menu M M - - 3 3 .
e Push and hold [F-1 V V O O X X ] for 1 sec. to enter the
VOX set mode.
r Select the VOX gain item using [F-1 ≤ ≤ ] or [F-2 ≥ ≥ ].
t While speaking into the microphone, rotate [DIAL]
to the point where the transceiver is continuously
transmitting.
y Adjust the VOX delay for a convenient interval be-
fore returning to receive.
- Select the VOX delay item using [F-1 ≤ ≤ ] or [F-2 ≥ ≥ ].
- Rotate [DIAL].
u If the receive audio from the speaker causes the
VOX circuit to switch to, adjust the anti-VOX set-
ting to the point where speaker audio does not ac-
tivate the VOX.
Appears