Instructions For Use - Otto Bock 4R110 Instructions For Use Manual

Last update: 2015-03-02
• Please read this document carefully.
• Follow the safety instructions and the precautions specified in this
accompanying document.
• If assistance is required during the start-up, use or maintenance of the
product, as well as in the event of unexpected operating behaviour or
circumstances, contact the manufacturer (see manufacturer's address
on the back of this accompanying document).
1 Scope of Delivery
4R110 Lamination Anchor with Pyramid Receiver for Children
647H252

Instructions for Use

2 Single Components (Fig. 1)
2.1 Single Component
–
2.2 Single-Component Pack
–
2.3 Minimum Order Quantity
(2) 506G3=M6×10 Set screws
(3) 506G3=M6×12 Set screws
(4) 501Z2=M4×20 Head screw
3 Safety Instructions
• Please read the relevant material safety data sheet of the lamination resin
and hardener before laminating.
• Use torque wrench for tightening the adjustment screws and tube clamp
and observe the torque values!
4 Description
4.1 Intended Use
The 4R110 Lamination Anchor is suitable for both transtibial and transfemoral
prostheses and is to be integrated into the prosthetic socket during lamination.
4R110
English
Ottobock | 9