Product Description - Otto Bock 8E33 Series Instructions For Use Manual

Nicht in die Lichtquelle starren
Rechtlicher Hersteller
1 Foreword
INFORMATION
Last update: 2016-11-07
► Please read this document carefully before using the product.
► Follow the safety instructions to avoid injuries and damage to the product.
► Receive instruction in the correct and safe use of the product by qualified personnel.
► Please contact the qualified personnel if you have questions about the product (e.g. regard­
ing the start-up, use, maintenance, unexpected operating behaviour or circumstances).
Contact information can be found on the back page.
► Please keep this document in a safe place.
The 8E33=7-1, 8E34=7-1, 8E33=9-1, 8E34=9-1 System Electric Greifers are referred to as the
product/prosthesis/terminal device in the following.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.

2 Product description

2.1 Design
The product consists of the following components:
2.2 Function
The product is a myoelectrically controlled terminal device of the MyoBock prosthesis system.
1. Fingertips
The position can be rotated by ±60° to adapt to various tasks.
1 For other types of fingertips, see the section "Accessories"
(see Page 23)
2. Safety lever
To unlock the prehensile arm drive (see Page 27)
3. Dial
For manual opening/closing
2
4. On/Off switch
To turn the electronics and flexion joint on/off
Position of the rocker switch towards the terminal device: elec­
3
tronics switched on and flexion brake released
Position of the rocker switch towards the prosthetic socket:
4
electronics switched off and flexion joint blocked
5 5. Quick-disconnect wrist unit (only with 8E33*)
Mechanical connection to the lamination ring
English
17