Otto Bock BetaSil 616S5-1 Instructions For Use Manual page 8

2 Application
2.1 Application
BetaSil is designed for use in orthopaedics technology. It may only be used by qualified person­
nel.
2.2 Area of Application
616S5=1, 616S6=1 BetaSil is used for filling up scars and concavities and for adding cushions.
This achieves a complete form fit with the residual limb for a standard silicone liner.
The product is suitable for direct application to the skin. It must not be applied to open wounds.
The product should not come into contact with body orifices such as the eyes, mouth, nostrils,
ears or genitals. For safety reasons, a test should be performed prior to actual application, for
example on the inside of the wrist. Do not use if erythema or skin rash occur.
3 Safety
3.1 Explanation of warning symbols
Warnings regarding possible risks of accident or injury.
CAUTION
NOTICE Warnings regarding possible technical damage.
3.2 General Safety Instructions
CAUTION
Using the product without following the instructions for use
Deteriorating health condition and damage to the product because of failure to follow the safety
information
► Observe the safety information in these instructions for use.
Make the patient aware of all safety instructions marked with "Inform the patient".
►
CAUTION
Use of the product on damaged skin
Skin irritation, formation of eczema or infections due to contamination with germs
► Only use the product on healthy skin.
Inform the patient.
►
CAUTION
Improper processing of the material
Injuries due to careless processing
► Follow the processing instructions.
NOTICE
Use of improper cleaning agents
Damage to the product due to use of improper cleaning agents
► Only clean the product with the approved cleaning agents.
4 Scope of Delivery
The scope of delivery for the product is shown on page 1 (cover picture).
8 | Ottobock