Otto Bock 10V18 Instructions For Use Manual page 10

NOTICE
Risk of damage due to improper environmental conditions. The pros-
thesis and its components should not be subjected to intense smoke,
dust, vibrations, shocks or high temperatures. Do not allow debris or
liquids to get into the prosthesis and its components.
Failure to follow these instructions can lead to malfunctioning and da-
mage of the prosthesis.
NOTICE
Risk of damage due to use of improper cleansing agents. Do not
use any aggressive cleaning agents since they could cause damage to
bearings, seals and plastic parts.
2.4 Function
10V18=*/10V36=*
The Ottobock Friction Wrist Units are available in the following designs:
• 10V18=* with metric thread M12×1.5
• 10V36=* with thread measured in inches ½"-20
For available sizes see table in section 3.
The Ottobock Friction Wrist Units provide connection between prosthetic
hand and forearm socket.
The terminal device can be stopped in any rotational position through the
deformation of the Rubber Friction Ring 11D27=*.
3 Technical data
Article number
Weight (g)
Total height (mm)
10 | Ottobock
10V18=
40 34
50 35
34 30
10V18=
10V36=
45 50
55 65
36