Installing The Chassis; Rack Mount The Chassis - Cisco CQ211L01-48H8FH Hardware Installation Manual

Installing the Chassis

•
•
•
•

Rack Mount the Chassis

The chassis can be mounted on a 4-post rack.
Warning
Warning
Hardware Installation Guide for Cisco CQ211L01 Switch
14
Rack Mount the Chassis, on page 14
Ground the Chassis, on page 20
Power Supply Unit Input and Output Ranges, on page 22
Connect AC Power to the Chassis, on page 23
Statement 1032—Lifting the Chassis
To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the handles
on modules, such as power supplies, fans, or cards. These types of handles are not designed to support the
weight of the unit.
Statement 1006—Chassis Warning for Rack-Mounting and Servicing
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
unit in the rack.
3
C H A P T E R