6: Zone Setup - Honeywell FIre-LITe ALArms MS-9600LS Manual

Programming
To change the date, press 2 while viewing the Time and Date Screen. The following screen will be
displayed:
A flashing cursor will appear on the left side of the display. Enter the two digit month, two digit
day and four digit year. The cursor will move one position to the right after each entry. When the
fourth digit of the year has been entered, the display will return to the Time and Date Screen which
will show the new date.
3.7.6 Zone Setup
PROGRAMMING
Pressing 3 while viewing Maintenance Screen #2 will display the following screen:
1=WALKTEST
2=SYSTEM
3=ZONE SETUP
Maintenance Screen #2
144
ENTER DATE
MONTH DAY YEAR
01-01-2010
Date Screen
ZONE SETUP
1=ENABLE
2=DISABLE
3=ZONE 97 98 99
Zone Setup Screen #1
ZONE SETUP
1=ZONES INSTALLED
2=ZONES ENABLED
3=ZONES DISABLED
Zone Setup Screen #2
ZONE SETUP
1=ZONE TYPES
2=ZONES AVAILABLE
3=ZONE MESSAGE
Zone Setup Screen #3
MS-9600LS Series Manual — P/N 52646:B2 2/12/2010
Maintenance Programming Level