Honeywell FIre-LITe ALArms MS-9600LS Manual page 122

Programming
Pressing 1 for Type will display the following screens:
Press the number corresponding to the module type that is installed with the selected address.
NOTE:
is selected, the ANN-BUS Address Screen shown on the previous page will be displayed following
the module selection. The options selected for each of these modules will be the same for all
modules of the same type (refer to "ANN-S/PG (Print) Options" on page 132 and "ANN-80
Options" on page 133).
If ANN-I/O, ANN-LED or ANN-RLY is the selected module type, the following ANN-BUS
Address Screen will be displayed:
Since the options for each of these module types can be individually set, pressing 2 for Module
Options, while viewing the ANN-BUS Address Screen will display the available options as
described below.
122
ANN-BUS MODULE TYPE
1=NOT INSTALLED
2=ANN-80 MODULE
3=ANN-I/O MODULE
Module Type Screen #1
ANN-BUS MODULE TYPE
1=ANN-S/PG MODULE
2=ANN-LED MODULE
3=ANN-RLY MODULE
Module Type Screen #2
ANN-BUS MODULE TYPE
1=ANN-AUDIO
Module Type Screen #3
If the module type selected is the ANN-80, ANN-S/PG, or ANN-AUDIO or if Not Installed
ANN-BUS MODULES
ANN-BUS ADDRESS #
1=TYPE
2=MODULE OPTIONS
ANN-BUS Address Screen
Master Programming Level
ANN-I/O
MS-9600LS Series Manual — P/N 52646:B2 2/12/2010