5: System - Honeywell FIre-LITe ALArms MS-9600LS Manual

Maintenance Programming Level
3.7.5 System
To program the time and date into the control panel, press 2 while viewing Maintenance Screen #2.
The following display will appear:
Pressing 1 while viewing the System Screen will cause the following screen to be displayed:
To change the time, press 1 to display the following screen:
A flashing cursor will appear on the left side of the display. Enter the four digit number corre-
sponding to the time (0000 - 1259). When the fourth digit is entered, the cursor will move one
position to the right. Press 1 for AM or 2 for PM to complete entering the time. The display will
return to the Time and Date Screen displaying the new time.
MS-9600LS Series Manual — P/N 52646:B2 2/12/2010
SYSTEMS
1=TIME/DATE
System Screen
TIME AND DATE
1=TIME 01:00 AM
2=DATE 01-01-2007
Time and Date Screen
ENTER TIME
01:00 AM
1=AM
Time Screen
12HR
2=PM
Programming
143