Table of Contents
Advertisement
26 of 62
5 Installation at Site
5. Fit the cable conduit at the cable entry (3) of the collecting tank.
6. If applicable, connect the overflow line to the overflow connection (1) with a
flexible low-pressure pipe coupling as per the manufacturer's product literature
and the local regulations.
Drainage with integrated valves
1
2
Fig. 16: Connections of a collecting tank with integrated valves (example)
1 Overflow connection (optional)
2 Inlet line connection
ü The collecting tank has been positioned, levelled and installed properly.
(ð Section 5.3, Page 23)
ü The product literature provided by the manufacturer of the flexible low-pressure
pipe couplings and high-pressure pipe coupling is available.
1. Connect the discharge line to the discharge connection (4) with the flexible
high-pressure pipe coupling as per the coupling manufacturer's product
literature. Lay the discharge line in accordance with the applicable local
regulations regarding backflow prevention.
2. Carry out a pressure test.
3. Clean the inlet line.
4. Connect the inlet line to the inlet connection (2) with a flexible low-pressure
pipe coupling as per the manufacturer's product literature.
5. Fit the cable conduit at the cable entry (3) of the collecting tank.
6. If applicable, connect the overflow line to the overflow connection (1) with a
flexible low-pressure pipe coupling as per the manufacturer's product literature
and the local regulations.
SRA
3
4
4
3 Cable entry
4 Discharge connection
Advertisement
Table of Contents
