Uv Lamp Removal/Replacement & Calibration - Hayward HydroRite UVO3 Troubleshooting Manual

UV Lamp Removal & Replacement
Follow the steps provided below to remove and/or replace the UV lamps.
Step 1
First unplug the HydroRite from its power
source and turn off the filtration pump.
Step 3
Remove the vessel cover by loosening the four
retaining screws.
18
Step 2
Close off the bypass valve to isolate the
HydroRite hydraulically.
Step 4
Disconnect the three Ozone tubes from the
Ozone manifold (tubes are fixed to lamps).