Hayward HydroRite UVO3 Troubleshooting Manual page 46

Hide thumbs Also See for HydroRite UVO3:

Table of Contents

4. Vessel is Leaking (cont.)

Both the main seal & drain plug have o-rings that act to seal the vessel from leaking.

IF either of these parts are damaged this may provide a leak path.

Inspect O-Ring (Vessel's Main Seal)

Inspect Drain Plug & O-Ring

Step 4E

Step 4F

With the pump off, remove the main retaining nut to

With the pump off, remove the drain plug and inspect

reveal to vessel's main seal. IF the o-ring is damaged,

its o-ring. IF the o-ring or plug are damaged, replace

replace it (SB2KIT). IF the o-ring is intact, proceed to

the o-ring (SB2KIT) or plug (BSX1PLUG2). IF fully intact,

step 4F.

proceed to step 4G.

Table of Contents