Table of Contents
Advertisement
2
Image 5–22
2.
Snap the first loop end of the safety cable into the upper clip on the side of the cable bundle (reference 2,
Image
5–22). and let the loop end point downwards.
3.
Slide the rest of the cable around the lens counterclockwise. Click the cable into every clip it passes in this
loop.
Note: Make sure the cable passes between the lens and the cable bundle.
4.
Slide the cable through the loop end at the beginning of the cable.
Image 5–24 Example of configuration A
5.
Install a U-bolt on the lens holder, with the open ends oriented outwards (reference 3). Make sure that both
a part of the loop end and the outgoing part of the safety cable are placed in the enclosure.
1
Image 5–23
Installation procedures
2
1
R5906150 /05
XDL
59
Advertisement
Table of Contents
