Accessing The Mains Compartment - Barco XDL Installation Manual

Installation procedures
1
Image 5–8

5.5 Accessing the mains compartment

Required tools
• Phillips screwdriver PH1
• Torx screwdriver T10
• Allen wrench 3 mm
How to access the mains compartment?
1. Loosen the four retaining screws (reference 1
2. Remove the mains cover.
Image 5–9
3. Unlatch and pivot the right front plastic cover door (door which contains the dust filters).
4. Loosen the retaining screw (reference 2
5. Pivot the inner door to access the mains compartment from the side.
2. Depending on the production date of the projector, the captive screws can either be Phillips screws or Torx screws. Refer to the tools
list to see what tool you may require.
50 R5906150 /05 XDL
1
Image
2
3
Image 5–9) of the mains cover.
5–10) of the inner door.
4
2