Removing The Start Number Plate; Installing The Start Number Plate; Removing Front Fender - Husqvarna TX 300i 2021 Owner's Manual

11.14

Removing the start number plate

11.15

Installing the start number plate

11.16

Removing front fender

SERVICE WORK ON THE CHASSIS 11
–
Remove screw
–
Remove screw
number plate.
K01332-10
–
Position the brake line and brake line guide on the start num-
ber plate.
–
Mount and tighten screw
–
Position the start number plate.
The holding lugs engage in the fender.
–
Mount and tighten screw
K01331-10
Preparatory work
–
Remove the start number plate. (
Main work
–
Remove screws
K01078-10
1
.
2
and take off the brake line guide and start
1
.
2
.
p. 57)
1 2
and . Remove front fender.
57