9. Insert the jack handle into the worm
shaft of the jack and turn it counterclock
wise to lower the vehicle.
10-9
Wheel cap
10. Tighten the wheel lug nuts securely in
the diagonal order across the wheel.
Tightening torque: 9 - 12 kgf-m
(65 - 87 ft-lb, 88.2 - 117.6 N.m)
CAUTION
Do not tighten the lug nuts with other
tools or by foot.
It may damage the thread of the lug nuts
or hub bolts.
After driving of 1,000 km (600 miles),
check to see that the wheel lug nuts are
tight.
11. Install the wheel center cap of the wheel
cover, by lightly tapping, aligning the
cutout section with the air valve.