PERODUA Kancil Owner's Manual page 134

3. Insert the cutout section of a new blade
into the large hole section of the frame.
Pull the blade along the slot into the
frame.
4. While pushing the projection, pull the
blade until it is locked.
Light bulb replacement
Use the bulb as specified.
(See Section 14)
WARNING
To prevent injury;
• Turn the engine off before replace­
ment.
• Keep children away from a bulb.
• Allow the bulb to cool before re­
placement.
CAUTION
Do not drop a bulb or scratch the sur­
face.
After replacement, turn the light switch on
to see that the light will be illuminated.
If a bulb requires frequent replacement,
have the system checked by a Perodua
dealer.
We recommend keeping a set of spare
bulbs. Bulbs are available at a Perodua
dealer.
Headlights
To remove bulb
1. Remove the front bumper by removing
nine bolts.
2. Dismantle the headlamp by removing
three bolts.
13-20