Fuse check and replacement
Locate the cause and remedy the prob
lem before installing a new fuse. If you
cannot, have the system checked by a
Perodua dealer.
1. Turn the ignition switch off and remove
the fuse box lid.
2. Make sure that the switch of the mal
functioning component is off.
3. With your fingers, pull out the fuse you
want to check.
Good
Should corrective repair be delayed, dis
connect the cable from the negative termi
nal of the battery as a precautionary meas
ure.
WARNING
To prevent a fire due to excessive cur
rent flow;
Blown
• Never install anything in place of a
fuse even temporarily.
• Make sure to use only fuses with the
specified capacities.
Never especially use a fuse with its
amperage rating higher than speci
fied.
We recommend keeping a set of spare
fuses for emergency.
13-12