PERODUA Kancil Owner's Manual page 136

Front turn signal lights
Front bumper rear view
1. Look for a service hole on the bumper
underneath the signal lamp. (Use a flash­
light if necessary).
Insert a screwdriver through the hole
and use it to push and pry the lamp out
as shown in the illustration.
2. Disconnect the connector by push the
pin.
3. Rotate the bulb counterclockwise to re­
move.
Side turn signal lights
1. Pull the side turn signal light in the direc­
tion® while pushing it in the direction®.
2. Disconnect the wire connection.
Ot.E13035
13-22