@ Screw the new filter into place and
tighten it by hand until the gasket
contacts the seat.
Then, give the filter about one addi
tional turn to seat it.
® Install the number plate, reversing
the installation procedure.
® Reinstall the drain plug and new
gasket.
Tighten the drain plug with a proper
size wrench.
CAUTION
Do not overtighten the oil filter and drain
plug. It could cause oil leakage.
(J) Use Castrol M TEC SG or equivalent.
@ Slowly pour engine oil.
For engine oil capacity, see Section
14.
® Install the oil filler cap by hand.
WARNING
Securely install the oil filler cap. If not,
oil consumption may increase and en
gine oil may be splashed on the com
ponents, which may cause a fire.
@) Wait a few minutes and check the
engine oil level.
@ Run the engine and check if engine
oil is leaking from the oil filter or drain
plug.
Any leak indicates improper installa
tion of the oil filter or drain plug.
@ Turn the engine off and wait a few
minutes.
Check the engine oil level again and
add oil, if necessary.
WARNING
• Clean any spilt oil. It may cause a
fire if it is left on a hot component.
• Wash your hands thoroughly.
• Prolonged contact with used en
gine oil could cause skin cancer.
-
.
13-6