Center cap
3. Insert the beveled section of the screw
driver under the center cap or the wheel
cap.
Pry with the screwdriver to remove the
center cap or wheel cap.
Wheel cap
4. Slightly loosen the wheel lug nuts with
the wheel lug nut wrench.
Do not remove the lug nuts.
WARNING
Be careful not to get injured by slip
ping the lug nut wrench.
.::
5. Four jack setting points are provided:
two on each side as shown in the illus
tration.
Set the jack at the jack setting point that
is nearest to the flat tyre.
10-6