Hazard Warning Signal Switch - PERODUA Kancil Owner's Manual

Headlight
flasher
�. - ,:o-
0o ,o
�
--
To turn on/off high beam
With the headlights on, push the lever
forward to turn on high beam and pull it
back to turn off.
The indicator light on the instrument panel
will glow.
To flash lights
Pull the lever lightly and release.
The headlight flasher works with the head­
light on or off.
4-3
Turn signal light control switch
High beam
The turn signal lights flash with the ignition
turned "ON".
Move the multi-control lever up or down to
signal a turn.
The indicator lights on the instrument panel
will begin flashing.
You can also signal a lane change by mov­
ing the lever slightly and holding it there.
If the lights flash faster than normal, a
bulb may be burned out.

Hazard warning signal switch

i
(&)
r
,
Push the switch down to flash all the turn
signal lights.
The indicator lights on the instrument panel
will begin flashing.
Pull the switch up to turn off.
The turn signal switch will not operate when
this switch is on.
Do not operate this switch except in an
emergency.
WARNING
Pull off the road in case of an emer­
gency to prevent an accident.