PERODUA Kancil Owner's Manual page 135

2. Disengage the clips and remove the
bulb.
13-21
To install bulb
1. Install the bulb and lock the clips.
2. Install the rubber cover by aligning the
"/',." marks with each other.
3. Connect the wire connection.
CAUTION:
Make sure guide pin of headlamp assem­
bly inserted to the guide hole of head
lamp support during installation of head­
lamp.
1. Remove the bulb socket by turning it
counterclockwise about 45 degree.
2. Remove the bulb from the socket by
pulling it.
0t.,.,,.,.