Porsche 911 2020 Owner's Manual page 318

Wheels and Tires
Mounting the wheel
A
B
C
D
E
F
G
H
I
J
K
L
M
Fig. 260: Fitting the wheel onto the wheel hub
N
NOTICE
O
P
Risk of damage to brake disks on vehicles with a
Porsche Ceramic Composite Brake (PCCB).
Q
e Do not rest the wheel on the PCCB brake disk
R
when fitting it onto the wheel hub.
e Use the PCCB assembly aid.
S
T
1. Carefully fit the wheel onto the wheel hub with-
out tilting it. Engage the wheel in the wheel bolts
U
by turning it slightly and press it against the
V
brake disk.
W
X
Y
Z
316
Grease the following areas each time you mount a
wheel
Fig. 261: Greasing components
2. Wipe away old grease and dirt at conical surfa-
ces E in the wheel as well as at outer front side F
of the wheel hub. Then coat very thinly with alu-
minum paste. This helps the bolt to slide better
into its seat.
3. Thread G in the wheel hub must be well greased.
To this end, re-grease with aluminum grease
each time the bolt is removed or installed. Do not
remove the old grease. All other parts and con-
tact surfaces must be free of grease.
e Only use aluminum grease that has been ap-
proved by Porsche.
Fig. 262: Installing the central bolt
4. Insert the central bolt into the wheel hub and
screw it in by hand.
Fig. 263: Fitting the socket