Porsche 911 2020 Owner's Manual page 102

Convertible Top
A
B
C
D
E
F
G
H
I
J
K
L
Fig. 51: Removing the Rollover protection trim panel
M
3. Fold both Rollover protection trim panels C for-
ward and unclip upward.
N
O
P
Q
R
S
T
U
V
W
X
Y
Fig. 52: Removing the Rollover protection cover
Z
100
4. Unscrew both screws D of the Rollover protec-
tion cover using the screwdriver.
5. Release Rollover protection cover E out of the
clip points by pulling upward.
Fig. 53: Folding in the wind deflector
6. Remove screws F from the wind deflector motor
using metal insert A (TORX ) of the emergency
®
operation key.
7. Pull retaining bracket G forward (lever out using
a screwdriver if necessary) until the gears no
longer engage.
8. Remove the retaining bracket.
9. Fold in the wind deflector by hand.
De-tensioning the convertible-top
mechanism
Fig. 54: De-tensioning the convertible-top mechanism
e Using the hexagon on plastic attachment B, turn
emergency hand screw H approx. 180° counter-
clockwise.
NOTICE
e Only loosen emergency hand screw H, do not
unscrew completely.