Porsche 911 2020 Owner's Manual page 239

Opening glass slide/tilt sunroof
Fig. 189: Operating glass slide/tilt sunroof
A Open/close slide/tilt sunroof
B Raise/lower slide/tilt sunroof
C Open/close sunblind
Stage one – manual operation
e Press and hold button A in the first setting until
the required position is reached.
The process stops when the button is released.
Stage two – automatic operation
e Briefly press button A to the second setting.
The slide/tilt sunroof opens automatically to the
final position.
e To interrupt the process, press button A again.
Raising or lowering slide/tilt sunroof
e Press button B.
The slide/tilt sunroof is raised or lowered to the
final position.
e To interrupt the process, press button B again.
Closing slide/tilt sunroof
Stage one – manual operation
e Pull and hold button A or C (only steel slide/tilt
sunroof) in the first setting until the desired po-
sition has been reached.
The process stops when the button is released.
Stage two – automatic operation
e Briefly pull button A or C (only steel slide/tilt
sunroof) to the second setting.
The slide/tilt sunroof closes automatically to the
final position.
e To interrupt the process, press button A or C
again.
Closing the slide/tilt sunroof after repeated
intervention of the force limiter
Anti-pinch protection
WARNING
deactivated
Slide/tilt sunroof and sunblind close with their full
closing force. Parts of the body that become trapped
between the moving and stationary vehicle parts
may be crushed.
e Make sure that no parts of the body become
trapped between moving and stationary vehicle
parts when closing.
If the closing process is impaired by an obstruction,
the slide/tilt sunroof can be manually closed using
increased force.
1. Remove the obstruction.
2. Pull button A or C (only steel slide/tilt sunroof)
until the slide/tilt sunroof comes to a standstill in
the closed position.
Slide/Tilt Sunroof
Opening and closing sunblind
Stage one – manual operation
e Press and hold button C in the first setting until
the required position is reached.
The process stops when the button is released.
Stage two – automatic operation
e Briefly pull or press button C to the second
setting.
The sunblind opens or closes automatically to
the final position.
e To interrupt the process, press button C again.
If the slide/tilt sunroof is partly or fully opened, the
sunblind can only be closed up to the front edge of
the slide/tilt sunroof.
If the sunblind is closed, it will be automatically
opened together with the slide/tilt sunroof
(coupled).
Raising or lowering the slide/tilt sunroof does not
affect the position of the sunblind.
Closing the sunblind after repeated interven-
tion of the force limiter
Anti-pinch protection
WARNING
deactivated
Slide/tilt sunroof and sunblind close with their full
closing force. Parts of the body that become trapped
between the moving and stationary vehicle parts
may be crushed.
e Make sure that no parts of the body become
trapped between moving and stationary vehicle
parts when closing.
If the closing process is impaired by an obstruction,
the sunblind can be closed manually using increased
force.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
237