Safety Caution - Cubicon Single Plus User Manual

2. Safety caution

Please read and follow the guide of 'Safety Cautions' in prior to printer use.
Aim of the guide is to prevent printer user or third party injury and printer damage
Serious injury or printer damage may occur, unless you follow this safety guide.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the
instructions.
Fire may occur due to part of human body or any object input into printer as high heat occur during printer
operation. Printer shall be stopped and cooled in the case of inputting human body part or any subject
inside printer during printer operation.
The printer operates movable parts such as motor, belt, gear etc. injury may occur due to getting jammed
in movable parts in the case of putting human body or any subject into printer.
User shall be cautious that fire or shock may occur in the case of putting water or other liquid or metal
pieces or any other conductive foreign substances into the printer. Besides, do not handle the printer with
wet hand as there is fire/electric shock danger.
User shall be cautios on installation place as children or pet may get injured by the printer. Children or pet
around the printer shall be under care and protection.
Printer or its subsidiary materials include sharp surfaced parts. The user shall be cautious of any possible
his/her body injury or printer damage.
Do not heat or transshape main material of the printer-Filament, as it may cause fire or injury. User shall
be cautious that suffocation may occur in the case of swallowing output or Filament leftover.
Do not use volatile objects for the printer as it may cause fire/explosion. Remove any ignition or
inflammable material from printer side, as negligance of such objects may cause fire.
User shall protect his/her eyes from looking at the printer LED directly, as the LED contains high-brightness.
Do not cause damage or transformation on the printer power and USB cable and do not supply power
more than designated voltage power.
In the case of moving printer, make sure to stop printer operation first and cool inside printer parts off, and
then separate printer power and USB cable after turning off main power of the printer.
Do not put Filament or other objects into empty space of the inside printer, as it may cause printer
damage and fire.
Do not turn off the printer power in heat condition of heating bed or extruder as it may cause printer
malfunction or fire due to extreme heat by cooling fan malfunction.
The printer uses materiall by melting them and may cause unique smell in the process of melting
materials. Therefore the printer shall be installed in well ventilated place.
Do not install the printer in places such as outdoor, direct sunlight reflective place, vibratory or humid place.
Do not install the printer in wobble or uneven place. Remove any objects from around the printer, which
may cause printer damage due to heat or vibration in the printer operation process.
The compnay do not guarantee the printer damage or quality in the case of not using the company
supplied Filament or components. All problems, which are caused by such cases are excluded from
complimentary A/S.
User shall not dismantle or remodel the printer arbitrarily apart from the printer instrucion manual allowed
parts. Problems, injury or printer damage, which are caused by such cases are excluded from
complimentary A/S.
Do not cause extreme impact or shock to the printer as it may cause damage or injury. Users are advised
to use the printer after reading precautions section of the instrution manual.
6
CUBICON Single Plus User Manual