User Guide
a. Unlatch the CMA(s) at the elbow connector by pressing the blue release button to unlatch
the connector from the rail.
Figure 69: Unlatching a CMA Connector
b. Swing the CMA(s) away from the enclosure.
c. The CMA arm(s) should be extended away from the enclosure.
Step 2 : Disconnect the Enclosure from power.
a. Locate the redundant PSUs at the rear of the enclosure.
b. Detach the cable retention mechanism from both power cords.
Figure 70: Clip-Style Cable Retention
3.7 CMA Replacement
3. Support
81