Western Digital Ultrastar ScaleUp SE4U102 User Manual page 135

User Guide
Figure 128: Rail Safety Latch
Step 20 : Install the inner rail onto the chassis making sure they are installed on the correct side. Each inner
rail will read "R" for the right or "L" for the left embossed on the side that faces away from the
chassis. Right and Left are with reference to looking at the front of the enclosure.
a. Orient the inner rails so that the flat side is facing the enclosure and the side with the
grooves is facing away from the enclosure.
b. Align the keyholes on the inner rail to the mounting pegs on the side of the enclosure and
press the inner rail flush against the chassis. If the keyholes don't line up with the pegs, flip
the rail length-wise to see if this will align them.
Figure 129: Inner Rail Attachment
c. Slide the inner rail toward the rear of the chassis to lock it in place. There will be an audible
click and the mounting pegs will cover the front part of the keyhole.
3. Support
3.8 Rails Replacement
119