Western Digital Ultrastar ScaleUp SE4U102 User Manual page 154

User Guide
For PSUs with the strap-style retention mechanism, secure the power cable to the PSU
handle with the hook-and-loop strap as shown in the following image.
Figure 154: Strap-Style Cable Retention
h. Route the power cable through each basket.
i. If the installation includes more than 10 total cables, follow the recommendations in
Considerations for Cable Routing (page
Note: Each cable must be given enough slack at the connector end to operate
smoothly. Allow 20 - 21 in. (508 – 533.4 mm) between the connector and the
first basket.
189), before proceeding.
3. Support
3.8 Rails Replacement
Special
138