Western Digital Ultrastar ScaleUp SE4U102 User Manual page 204

User Guide
Figure 230: Cinching Cable Retention Clip
For PSUs with the strap-style retention mechanism, secure the power cable to the PSU
handle with the hook-and-loop strap as shown in the following image.
Figure 231: Strap-Style Cable Retention
f. If the Ultrastar Data102 is being installed in a rack and will subsequently be transported
inside that rack, it is important to use the included cable tie to wrap the CMA bundle to
ensure it does not get damaged during transport. If the Ultrastar Data102 is instead being
installed where it will operated, skip this step.
g. Close all of the baskets.
h. Reconnect the CMA at the elbow to connector A.
Step 55 : Test for binding in the extension of the arm by gently pulling the enclosure out of the rack,
ensuring the cables extend properly and that the system doesn't bind at all. If it does, examine
the point at which the binding occurred and adjust the seating of cables in the baskets, check
the connections to the rails, and examine the joints of the arm to ensure that they are all
functioning properly.
3. Support
3.9 Chassis Replacement
188