Cisco 7513, Cisco 7513-Mx, And Cisco 7576 Blower Module Assembly - Cisco 7500 Series Configuration Manual

Chapter 1 Cisco 7500 Series Product Overview
Figure 1-32

Cisco 7513, Cisco 7513-MX, and Cisco 7576 Blower Module Assembly

The Cisco 7513, Cisco 7513-MX, and Cisco 7576 use a blower module assembly that is located at the
top rear-end of the chassis (see
chassis interior. The blower module assembly also contains the system LEDs, which are located on a
nonremovable printed circuit card at the rear of the interior of the blower module assembly. (A spare
blower module assembly ships as Product Numbers MAS-7513-FAN= for the Cisco 7513 and Cisco
7513-MX and MAS-7576-FAN= for the Cisco 7576.) For blower module assembly maintenance
information, see the
Module" section on page
Figure 1-33
Blower module
OL-5008-03 B0
Blower Assembly (Cisco 7507 and Cisco 7507-MX)
Blower power
connection
Purple (+24V) Black (ground)
Captive Allen-head screws
Figure 1-33
"Removing and Replacing the Cisco 7513, Cisco 7513-MX, and Cisco 7576 Blower
7-10.
Blower Module Assembly (Partial Rear View of Cisco 7513, Cisco 7513-MX, and
Cisco 7576)
Captive installation screws (2)
Fan Tray and Blower Assembly Overview
Blower
and Figure 1-34). The assembly supplies cooling air to the
Cisco 7500 Series Installation and Configuration Guide
1-53