Installing The Cisco 7513, Cisco 7513-Mx, And Cisco 7576 - Cisco 7500 Series Configuration Manual

Chapter 3 Installing a Cisco 7500 Series Router

Installing the Cisco 7513, Cisco 7513-MX, and Cisco 7576

R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
If you are installing a second power supply, repeat Step 1 through Step 6.
Step 7
Note Do not turn on any power supplies until you are ready to power up the system. The interlock switch that
locks the power supply in the slot also turns on the system power.
This completes the procedure for attaching power cables to the DC-input power supplies in a Cisco 7507
or Cisco 7507-MX, as well as the procedures required to install the Cisco 7507 or Cisco 7507-MX.
For information on how to connect cables to the RSP, see the "Making Cable Connections to the RSP"
section on page 3-32, and then proceed to the "What Do I Do Now?" section on page 3-33.
Installing the Cisco 7513, Cisco 7513-MX, and Cisco 7576
This section provides procedures for installing your Cisco 7513, Cisco 7513-MX, or Cisco 7576 and
connecting power cables to power supplies. The flowchart in Figure 3-12 illustrates the recommended
order of procedures to install a Cisco 7513, Cisco 7513-MX, or Cisco 7576 router. It also indicates the
Cisco publications you should refer to for more detailed information.
Cisco 7500 Series Installation and Configuration Guide
3-19
OL-5008-03 B0