Default Settings (Option 7) - Lantronix XPress DR+ User Manual

Enable Enhanced Password
The Enhanced Password setting allows you to set a password of up to 16 characters for
protecting Telnet and Web Page access. We recommend that you select the Y (Yes) option and
enable the enhanced password setting.
Avoid using either the 4-character basic password setting or no password at all as they are not
secure options.
Enable Enhanced Password (Y) ? _

Default Settings (Option 7)

Select 7 to reset the unit's channel configuration, email settings, and expert settings to the default
settings. The server configuration settings for IP address, gateway IP address, and netmask
remain unchanged. The specific settings that this option changes are listed below.
Channel 1 and Channel 2 Configuration Settings
Baudrate
I/F Mode
Own TCP port number
Connect Mode
Hostlist retry counter
Hostlist retry timeout
Start character for serial channel 1
All other parameters
Expert Settings
TCP Keepalive time in s
ARP Cache timeout in s
Disable Monitor Mode @ bootup
HTTP Port Number
(1-65535)
MTU Size (512 – 1400)
Enable alternate MAC
TCP Re-transmission Timeout (500-4000)
XPress™ DR+ Industrial Device Server User Guide
9: Setup Mode: Advanced Settings
9600
4C (1 stop bit, no parity, 8-bit, RS-232C)
Channel 1: 10001
Channel 2: 10002
C0 (always accept incoming connection; no
active connection startup)
3
250 (msec)
0x0D (CR)
0
45
600
No
80
0 (resulting in an operational value of 1400)
No (for OEM use only)
500 (ms)
72