Reset Switch; Figure 3-8. Reset Switch - Lantronix XPress DR+ User Manual

Industrial device server

Hide thumbs Also See for XPress DR+:

Table of Contents

Reset Switch

The XPress DR+ includes a hardware reset switch located in the small hole above the power

connector. Pressing the reset switch causes a hardware reboot of the

XPress DR+. The hardware reset does not reset or change the configuration of the XPress DR+.

Caution:

Even though a chassis ground is not required for operation, it is

mandatory for protection against transient voltages and ESD. A chassis ground

must be connected to the ground.

XPress™ DR+ Industrial Device Server User Guide

3: Installation and Hardware

Table of Contents

Do you have a question about the XPress DR+ and is the answer not in the manual?

Xsdr22000-01