Enable Enhanced Password (Y) ? _
The Y (Yes) option allows an extended security password of 16-characters for protecting Telnet
access.
Default Settings (Option 7)
Select 7 Defaults from the Change Setup menu to reset the unit's Channel 1 configuration,
Channel 2 configuration, Security, and Expert settings to the factory default settings.
The server configuration settings for IP address, gateway IP address, and netmask remain
unchanged. See footnote for the WLAN settings that change.
Defaults for all settings are listed below.
Channel 1 Configuration
Baudrate
I/F Mode
Port No
Connect Mode
Hostlist Retry Counter
Hostlist Retry Timeout
Send Character
All other parameters
Channel 2 Configuration
Baudrate
I/F Mode
Port No
Connect Mode
Hostlist Retry Counter
Hostlist Retry Timeout
Send Character
All other parameters
WLAN Settings
Topology
WiBox® 2100E Device Server User Guide
8: Setup Mode: Advanced Settings
9600
4C (1 stop bit, no parity, 8 bit, RS-232C)
10001
C0 (always accept incoming connection; no active
connection startup)
3
250 (msec)
0x0D (CR)
0
9600
4C (1 stop bit, no parity, 8 bit, RS-232C)
10002
C0 (always accept incoming connection; no active
connection startup)
3
250 (msec)
0x0D (CR)
0
1 (AdHoc)
72