Lantronix XPress DR+ User Manual page 71

Disable Port 77FE (Hex)
Note: If you choose to disable this option, keep in mind that disabling both Telnet Setup
and Port 77FE will prevent users from accessing Setup Mode from the network.
Port 77FE is a setting that allows DeviceInstaller, Web Manager, and custom programs to
configure the unit remotely. You may wish to disable this capability for security purposes.
Disable Port 77FEh (N)? _
The default setting is the N (No) option, which enables remote configuration. You can configure
the unit by using DeviceInstaller, Web Manager, Telnet, or serial configuration.
The Y (Yes) option disables remote configuration and web sites.
Note: The Y (Yes) option disables many of the GUI tools for configuring the unit,
including the embedded Web Manager tool.
77FEh Access Mode
Configuring this setting is available if port 77FE is enabled. This option will not be listed if port
77FE is disabled.
Set 0 for Read & Write mode, and 1 for Read Only mode. Default value of this setting is Read-
Write(0).
If access mode is Read-only, then read operation can be done through port 77FE, if Read-Write
access is selected, then both read and write of data can be done through port 77FE.
77FEh Access Mode (0=Read & Write, 1=Read Only):
Disable Web Server
This setting defaults to the N (No) option. The Y (Yes) option disables the web server.
Disable Web Server (N) ? _
Disable Web Setup
The Y (Yes) option disables configuration using the Web Manager. This setting defaults to the N
(No) option.
Disable Web Setup (N) ? _
Disable ECHO Ports
This setting controls whether port 7 echoes characters it receives. The default setting is Y (Yes),
which disables ECHO ports.
Disable ECHO ports (Y) ? _
XPress™ DR+ Industrial Device Server User Guide
9: Setup Mode: Advanced Settings
(0) ?
71