Connecting The Chassis To An Ac Power Outlet - Sun Microsystems StorEdge 3000 Series Installation, Operation And Service Manual

SCSI device connections
Bus cabling and SCSI connections
2
RAID array
3
1 4
Ethernet
WAN
SCSI devices Servers and consoles
Management console
Expansion unit
Typical Sequence of Installation Steps
FIGURE 4-3
4.4 Connecting the Chassis to an AC Power
Outlet
When you connect the AC power cords, you should install the provided two cord
locks at the same time. The provided AC cord locks are used to securely fasten the
AC cable connectors.
Chapter 4 Connecting Ports 4-5