Inspecting The Disk Array; Installing The Disk Array; Connecting The Power Cord; Figure 2-1 Ac Power Connector - Sun Microsystems StorEdge A5000 Installation And Service Manual
Includes the entire series of storedge a5000 disk arrays (formerly the sun enterprise network array)
Hide thumbs
Also See for StorEdge A5000:
- Installation manual (2 pages) ,
- Product notes (6 pages) ,
- Installation (2 pages)
Table of Contents
Advertisement
2.3
Inspecting the Disk Array
1. Unpack the disk array.
2. Inspect the disk array for evidence of damage.
If damaged, keep all contents and packing materials for the shipping company's
agent to inspect.
3. Save the packing materials for future use.
2.4
Installing the Disk Array
Installing the disk array involves connecting the power cord, adding additional
interface boards and GBICs if needed, and routing the fiber optic cables. Read this
section before beginning the installation.
2.4.1
Connecting the Power Cord
1. Make sure that the power switch for the disk array is off.
2. Connect the power cord to the AC connector on the rear panel of the disk array
(
FIGURE 2-1
FIGURE 2-1
).
AC power connector
AC Power Connector
Chapter 2
Tabletop Installation
2-3
Advertisement
Chapters
Table of Contents
