Customer-Provided Cables; Mounting Your Array In A Rack Or Cabinet; Converting A Jbod To A Raid Array - Sun Microsystems StorEdge 3000 Series Installation, Operation And Service Manual

XTA-3310-RK-19M
XTA-3310-RK-19L
XTA-3310-RK-19C
XTA-3310-RK-19F
3.4

Customer-Provided Cables

Customers must provide the following cables.
One Ultra 160 SCSI cable per host to connect a host to a RAID array, expansion
I
unit or JBOD; up to two host cables may be needed per array.
To obtain qualified cables, consult your Sun sales representative.
3.5 Mounting Your Array in a Rack or
Cabinet
Refer to Sun StorEdge 3000 Family Rack Installation Guide for instructions on how to
install and prepare a rack or cabinet for mounting your array.
3.6

Converting a JBOD to a RAID Array

If you want to convert a JBOD to a RAID array, refer to the Sun StorEdge 3000 Family
FRU Installation Guide.
3-4 Sun StorEdge 3000 Family Installation, Operation, and Service Manual • March 2004
Rackmount kit, 2U, 19-in. wide, 18- to 28-in. deep
Rackmount kit, 2U, 19-in. wide, 28- to 36-in. deep
Rackmount kit, Telco center mount, 2U, 19-in wide
Rackmount kit, Telco flush mount, 2U, 19-in wide