聲明4011-國家通信委員會警告; Intended Use Of Equipment; Changing Output Power; Obtaining Documents From Cisco.com - Cisco Catalyst IR1800 Rugged Series Hardware Installation Manual

聲明4011 國家通信委員會警告
聲明4011 國家通信委員會警告
警告
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率
或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有
干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規定
作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之
干擾。

Intended Use of equipment

The IR1800 Series provides radio slots to support multiple radio configurations based on use cases. Provisions
to support PoE and xDSL WAN are included. The chassis is powered directly off 12 to 24VDC vehicle-charging
systems or an external power source. The IR1800 Series can be used indoors or outdoors, as allowed by
regulations.

Changing Output Power

Changing the power output is allowed only by a trained service professional.

Obtaining Documents from Cisco.com

Follow these steps to obtain any of the online documents mentioned in this document.
• Browse to this URL on Cisco.com:
• For Cisco IR1800 Series products, go here.
Note
If you still have questions regarding the compliance of these products, or you cannot find the information you
are looking for, send an email to Cisco at complianceinfo@cisco.com.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
104
http://www.cisco.com/cisco/web/psa/default.html?mode=prod&level0=278875243
Regulatory Compliance